Product list

Platform Lift
Car Lift
Truck Crane
Non Asbestos Materials

How to solve the problem of leakage of hydraulic cylinder

It is easy to check and solve.
1. If the surface of the piston rod wear seriously or pulled out of the trench, people can repair it by brush plating or metal plating.
2. If the inner surface of the guide sleeve wears, people should change a new one because of the low cost.
3. If the hydraulic cylinder is badly worn, pull groove itself, or cavitation zone appears on the inner wall, then the brush plating technique can be used to repair it.
4. If the piston of silicon seal ring abrasion, then replace it.

Pre: How to maintain the crane gear pump correctly

Next:Announcements Before Using the Truck Crane