Product list

Platform Lift
Car Lift
Truck Crane
Non Asbestos Materials

How to operate the lift correctly

1. The lifting platform factory has been strict debugged before left our factory. Discretionary adjusted the pressure regulating valve will make the whole system operation abnormal. Non-professional person shall not adjust pressure regulating valve.
2. Lift Platform should be inspected carefully of the hydraulic and electrical system before it is in use. Make sure there is no leakage or bare phenomenon, various connection parts and fasteners without loosening.
3. Lift Platform must spending its supporting legs when it is working, to obtain maximum bearing area. Adjust the height of supporting legs, to make the platform level.
4. Switch on the power supply, start the motor, lifting up and down without loading. Check the hydraulic system is normal first, then lifting up and down again with loading.
5. The load center should be at the center position of operating panel.
6. Operator should operate the lift as the max.loading capacity. Overload may lead to personnel and equipment damage.
7. If there is abnormal noise when the lift working, operator should stop the machine immediately to check, to avoid equipment and personnel damage.
8. After using the Lift Platform , operator should lower platform, cut off the power supply and fold the supporting legs. Push the platform in a specified location.

Pre:Welcome foreign customers to visit our factory

Next:Operation Note Of Lift Platform